| 01. Fasten the
board or project firmly down before sanding. |
T |
F |
| 02. Set the
sander on the project and then start the machine. |
T |
F |
| 03. When changing
sandpaper attach, make sure the electrical cord is plugged
in. |
T |
F |
| 04.
Attach the sandpaper at each end of the sander. |
T |
F |
| 05. Sand only with
the grain of the board. |
T |
F |
| 06. Check the
machine for damaged parts before operating it. |
T |
F |
